Supply Flanges in Very Competitive Prices
Jinan Hyupshin Flanges Co., Ltd is your best choice in steel flanges buying and importing. We are supplying norms and standards of steel flanges in below: ANSI, ASA, ASME B16.5 Flanges, Class 150, 300, 600, 900. Type WNRF, SORF, Blind, Plate, Lap Joint, Threaded etc, Steel A105, A350. Size 1/2″ – 80″. DIN Flanges, Class…
GUESS WHERE IT WAS
Good air, blue sky and a nice photo, guess, where it is? My President visit here, but on weekend, there were no body at working, great city!
A Good Chance to Stock Flanges
Why it is good chance to stock flanges,1. Flanges prices are dropping to bottom soon.2. Global economy will turn better in the third or fourth season.3. Manufacturers have enough production capability to complete any orders.4. Manufacturers are glad to supply small orders in current.5. When global economy turn warm, somebody will be happy. Welcome to…
Flange Facing Types
Flange Facing Types One end of the flex joint is a flat face to match the pump face and the other end is raised face to match the flange. Flat Face (FF) – Typically these flanges are used on pump facings or on fiberglass flanges where the torque of compressing the gasket will damage the flange body. They are…
Flange Facing Finish
The flange face finish is determined by the standard used and measured as an Arithmetical Average Roughness Height (AARH). An example would be ANSI B16.5 which specifies face finishes within a range 125AARH – 500AARH (3.2 Ra to 12.5 Ra). Cold Water – It has a mirror like finish. This is made with a wide tool…
What is “PED”
Pressure equipment and gas appliances Pressure Equipment Directive (PED): The Pressure Equipment Directive (97/23/EC) was adopted by the European Parliament and the European Council in May 1997. It has initially come into force on 29 November 1999. From that date until 29 May 2002 manufacturers had a choice between applying the pressure equipment directive or…
Spring Festival Vacations ended, we return to work again.
Welcome to contact us for steel flanges requirements, we are back!